Leo310 AC 70-1000V ETCR1000C Non-Contact Phase Sequence Detector Magnetic Base Meter
❤ * ❤ * Welcome to the shop # leo310.th *❤ * ❤ *
★★★ Small gifts for customers ★★★
☛ Follow the shop there will be souvenirs delivered to customers as well.
☛ Like and leave a good comment. Have the right to send items first and get an additional 3% discount for the second order.
☛Delivery within 1-24 hours
☛ Guarantee that we have 100% stock. Click to order now.
Feature:
Phase sequence detection live line check simple power check live wire identification phase loss judgment wire break position search DC line break point detection line maintenance.
Clamp-type non-contact inductive measurement no need to open the wire no need to touch the high-voltage exposed fire wire directly sandwich the three super-inductive high-insulation clamps to the insulation skin of the three-phase live wire to detect the phase sequence.
Non-contact inspection for safe and fast productivity.
The dynamic sound and light indicates the positive or negative phase of the phase sequence of the three-phase power supply which is clear at a glance.
The bottom plate of the instrument is equipped with 4 magnets which can be attached to the metal casing of the equipment during testing and the operation is convenient and convenient.
Specification:
Model
ETCR1000C
Functions
Phase detection (Positive phase reverse phase and phaseloss) Live wire examination Simple Power detection Breakpoint location and Line maintenance.
Power Supply
DC 3V2*AA Alkaline dry battery Continuously working for 70 hours
AC Voltage Range(V)
AC 70 - 1000V 40/65Hz (Sine Wave Continuous Input)
Clamp Wire Size
External Diameter 1.6-16mm
LED Display
(Positive Phase Sequence)
The four phase-sequence lamps light in order (clockwise).
(Negative Phase Sequence)
The four phase-sequence lamps light in order (counterclockwise).
(Live Power)L1L2L3 lamp light up in the voltage setting range.
(Phase Loss) L1 or L2 or L3 does not light.
(Short Circuit)L1 or L2 or L3 does not light.
Buzzing
(Positive phase) The instrument emits intermittent short beeps;
(Reverse phase) The instrument emits a continuous long beep.
Power On Indication
Power on indication light turns on; Low power low battery light on
Magnetic force
Four magnets on the back of the meter which are attached to the distribution box and can withstand 800g quality.
Auto Power off
After 5 minutes the meter automatically cut off power supply.
Meter Dimension
Width height thickness 70mm*75mm*30mm
Clamp Lead Length
0.6m
Weight
317g
Working Temperature and Humidity
-10℃-55℃; below 80%rh
Storage Temperature and Humidity
-20℃-60℃; below 90%rh
Maximum Measured Voltage
AC 1000V
Dielectric Strength
5.4kVrms
Maximum rated Power
100mVA
Safety Provisions
EN61010-1: 2001 EN61010-031: 2002 Pollution level 2 CAT 3 (600V) Transient over-voltage 6000V
Package List:
1 * Non-Contact Phase Sequence Detector
1 * User Manual
Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
#Non-ContactPhaseSequenceDetector #PhaseSequenceMeter #PhaseDetector #Non-contactPhaseDetector #PhaseRotationMonitor